Siemens AC75 - Manual (Page 532)

AC75 AT Command Set
22.4 ATS5
s
AC75_ATC_V01.002 Page 532 of 569 10/30/06
Confidential / Released
22.4 ATS5 Write command line editing character
Syntax
Command Description
This parameter setting determines the character recognized by TA as a request to delete the immediately pre-
ceding character from the command line.
Parameter Description
command line editing character
000...8
(&F) ...127
Read Command
ATS5?
Response(s)
<n>
OK
Write Command
ATS5= <n>
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 - + + + + + + - + -
<n>
(num)(&W)(&V)