Used, Total, Ac75 at command set – Siemens AC75 User Manual
Page 439
AC75 AT Command Set
17.4 AT+CPBS
s
AC75_ATC_V01.002
Page 439 of 569
10/30/06
Confidential / Released
“MC“
Missed (unanswered received) calls list
Capacity: max. 10 entries
Location: ME
command is not applicable to this storage. The MC list can be
deleted with
.
“RC“
Received calls list
Capacity: max. 10 entries
Location: ME
command is not applicable to this storage. The RC list can be
deleted with
.
Value indicating the number of used locations in selected memory storage.
Value indicating the maximum number of locations allowed in the selected memory storage.
Notes
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section
Restricted access to SIM data after SIM PIN authentication
for further detail.
• If the SIM card is changed, all records of the "MC", "RC" and "LD" phonebooks stored on the ME will be
deleted automatically. If the same SIM is removed and reinserted, no automatic deletion is performed. Calls
made after last switch-on will be lost from "MC", "RC" and "LD" phonebook, if the SIM is removed and rein-
serted during normal operation.
• The following call history rule applies to the phonebook types "LD", "MC" and "RC":
When the same number is dialed several times in direct succession the "LD" phonebook will store one single
entry. When dialed several times, but in a row with different numbers, the same number will be logged each
time after dialing, resulting in double or multiple "LD" phonebook entries related to this number.
Likewise, the "MC" or "RC" phonebook will store only a single entry when calls from the same number are
received in direct succession, and double or multiple entries when calls from the same number are received
several times, but amongst other incoming calls from different numbers.
<used>
(num)
<total>
(num)