Siemens AC75 - Manual (Page 230)

AC75 AT Command Set
9.5 AT+CCUG
s
AC75_ATC_V01.002 Page 230 of 569 10/30/06
Confidential / Released
9.5 AT+CCUG Closed User Group
Syntax
Command Description
The Test command returns the supported parameters.
The Read command returns if the Explicit CUG invocation is activated (in parameter
<n>
), which CUG
<index>
is chosen, and if Preferential Group or Outgoing Access is suppressed (in parameter
<info>
).
The write command serves to activate or deactivate the explicit CUG invocation, to set the desired index, and to
specify if Preferential Group or Outgoing Access shall be suppressed.
Parameter Description
explicit CUG invocation options
0
(D) Deactivate explicit CUG invocation
1 Activate explicit CUG invocation
0-9 explicit selection of CUG index
10 (D) No index (preferred CUG taken from subscriber data)
Test Command
AT+CCUG=?
Response(s)
+CCUG:
list of supported
<n>
, range of supported
<index>
, range of supported
<info>
OK
ERROR
+CME ERROR
Read Command
AT+CCUG?
Response(s)
+CCUG: <n>
,
<index>
,
<info>
OK
ERROR
+CME ERROR
Write Command
AT+CCUG=
[[
<n>
][,
<index>
][,
<info>
]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07, GSM 02.85, GSM 03.85,
GSM 04.85
+ + + + + + + - + -
<n>
(num)
<index>
(num)