Siemens AC75 - Manual (Page 357)

AC75 AT Command Set
12.6 AT+FTH
s
AC75_ATC_V01.002 Page 357 of 569 10/30/06
Confidential / Released
12.6 AT+FTH Transmit Data Using HDLC Framing
The
AT+FTH
command causes the TA to transmit data using the HDLC protocol and the modulation scheme
<mod>
=3.
An ERROR response code results if the write command is issued while the modem is on-hook. The test com-
mand can be used either in on-hook or off-hook mode to check the value supported by the
<mod>
parameter.
Syntax
Note
• AC75 supports only
<mod>
=3.
Test Command
AT+FTH=?
Response(s)
+FTH:
(list of
<mod>
s)
OK
Write Command
AT+FTH= <mod>
Response(s)
CONNECT
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578 - + - + + - - - - -