Siemens AC75 - Manual (Page 529)

AC75 AT Command Set
22. Miscellaneous Commands
s
AC75_ATC_V01.002 Page 529 of 569 10/30/06
Confidential / Released
22. Miscellaneous Commands
The AT Commands described in this chapter are related to various areas.
22.1 A/ Repeat previous command line
Syntax
Command Description
Repeat previous command line.
Notes
• Line does not need to end with terminating character.
• After beginning with the character "a" or "A" a second character "t", "T" or "/" has to follow. In case of using a
wrong second character, it is necessary to start again with character "a" or "A".
• If autobauding is active, the command
A/
cannot be used (see
AT+IPR
).
Exec Command
A/
Response(s)
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 - + + + + + + - + -