Siemens AC75 - Manual (Page 279)

AC75 AT Command Set
10.6 AT^SISC
s
AC75_ATC_V01.002 Page 279 of 569 10/30/06
Confidential / Released
10.6 AT^SISC Internet Service Close
The
AT^SISC
write command closes the TCP/IP connection to the remote peer which was opened with
AT^SISO
. All resources are released, all status information parameters, e.g.
<srvState>
,
<unackData>
,
<ackData>
,
<rxCount>
and
<txCount>
counters, are reset. Only the initial configuration settings are pre-
served. The service can be restarted any time, using the same configuration or a new one.
Syntax
Parameter Description
0...9
<srvProfileId>
specified with
AT^SISS
.
Test Command
AT^SISC=?
Response(s)
OK
Write Command
AT^SISC= <srvProfileId>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
± + + + + + + - - -
<srvProfileId>
(num)