Siemens AC75 - Manual (Page 412)

AC75 AT Command Set
14.6 AT^SSET
s
AC75_ATC_V01.002 Page 412 of 569 10/30/06
Confidential / Released
14.6 AT^SSET Indicate SIM data ready
After power-up and personalization (PIN entry if required) the ME starts reading data from SIM. The
AT^SSET
command controls the presentation of the "
^SSIM READY
" URC which indicates, on the corresponding serial
channel, when the ME has finished reading SIM data. See Section 23.1 , Restricted access to SIM data after SIM
PIN authentication for further detail.
Syntax
Unsolicited Result Code
^SSIM READY
The URC acknowledges to the user that SIM data is accessible.
Parameter Description
URC presentation mode
0
(&F) Disable URC "
^SSIM READY
" indication.
1 Enable URC "
^SSIM READY
" indication.
Test Command
AT^SSET=?
Response(s)
^SSET:
(list of supported
<n>
s)
OK
Read Command
AT^SSET?
Response(s)
^SSET: <n>
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SSET=
[
<n>
]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS - + + + + + + - + -
<n>
(num)(&W)(&V)