Siemens AC75 - Manual (Page 359)

AC75 AT Command Set
12.8 AT+FTS
s
AC75_ATC_V01.002 Page 359 of 569 10/30/06
Confidential / Released
12.8 AT+FTS Stop Transmission and Wait
This command causes the TA to terminate a transmission and wait for
<time>
10 millisecond intervals before
sending the OK result code to the TE.
Syntax
Parameter Description
no. of 10 millisecond intervals
0...85
Write Command
AT+FTS= <time>
Response(s)
OK
In on-hook mode:
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578 - + - + + - - - - -
<time>
(num)