Siemens AC75 - Manual (Page 371)

AC75 AT Command Set
13.6 AT+CMGR
s
AC75_ATC_V01.002 Page 371 of 569 10/30/06
Confidential / Released
Notes
• Response if
AT+CMGR
is used to read an empty record index: +CMGR: 0,,0
• Response if
AT+CMGR
is used to read a non-existent record index: +CMS ERROR: invalid memory index
• The parameters
<ra>
and
<tora>
will only be displayed if parameter
<ra>
of the
AT^SSCONF
command is
set to 1.
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 23.1 , Restricted access to SIM data after SIM PIN authentication for further detail.