Siemens AC75 - Manual (Page 466)

AC75 AT Command Set
18.10 AT^SNFD
s
AC75_ATC_V01.002 Page 466 of 569 10/30/06
Confidential / Released
18.10 AT^SNFD Set audio parameters to manufacturer default values
AT^SNFD
sets the active audio parameters to manufacturer defined default values. These default values can be
changed and stored by the user and also by download with a new set of parameters.
The restored values are:
AT^SNFA
:
<atten>
AT^SNFI
:
<inBbcGain>
,
<inCalibrate>
AT^SNFO
:
<outBbcGain>
,
<outCalibrate>
[0 to 4],
<sideTone>
AT^SAIC
:
<io>
,
<mic>
,
<ep>
AT^SNFS
:
<audMode>
Syntax
Note
• Remember that the factory set audio mode 1 is fixed to
<outStep>
=4. Consequently,
AT^SNFD
restores
<audMode>
together with
<outStep>
=4, but does not affect the values of
<outStep>
currently selected in
audio modes 2 - 6. This means, if
<audMode>
=1, the read commands
AT^SNFO
,
AT^SNFV
and
AT+CLVL
will
always deliver
<outStep>
=4. In all other modes the
<outStep>
value is retained until explicitly changed.
Test Command
AT^SNFD=?
Response(s)
OK
Exec Command
AT^SNFD
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS - + + + + + + - + -