Ac75 at command set – Siemens AC75 User Manual
Page 143
AC75 AT Command Set
5.6 AT+CPWD
s
AC75_ATC_V01.002
Page 143 of 569
10/30/06
Confidential / Released
EXAMPLE 4
To specify a new "PS" lock password, after the old password was disabled (e.g. after three failed attempts to
change the "PS" password): use the master phone code.
CAUTION: THIS TEST SHOULD BE PERFORMED ONLY IF THE CORRECT MASTER PHONE CODE FOR
THE INDIVIDUAL ME USED IS DEFINITELY AVAILABLE! Otherwise the module used will be rendered use-
less until the correct master phone code is entered!:
Alternatively, without giving a new password:
AT+CPWD="PS","12345678","1111"
where 12345678 is the Master Phone Code and
1111 is the new password. You may also use
to restore the former disabled pass-
word.
OK
AT+CPWD="PS","12345678"
(where 12345678 is the Master Phone Code). Deac-
tivates the present phone lock.
OK