Ac75 at command set – Siemens AC75 User Manual
Page 398
AC75 AT Command Set
13.25 AT^SMGR
s
AC75_ATC_V01.002
Page 398 of 569
10/30/06
Confidential / Released
13.25
AT^SMGR Read short message without setting status to REC
READ
The
command is a specific Siemens command which has the same syntax as
. The only func-
tional difference is that the status "REC UNREAD" of a short message is not overwritten to "REC READ".
Syntax
Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section
Restricted access to SIM data after SIM PIN authentication
for further detail.
Test Command
AT^SMGR=?
Response(s)
^SMGR:
OK
Write Command
AT^SMGR=
Response(s)
see
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
+
+
+
+
+
+
+
-
+
-