Siemens AC75 - Manual (Page 336)

AC75 AT Command Set
11.12 AT+CGREG
s
AC75_ATC_V01.002 Page 336 of 569 10/30/06
Confidential / Released
11.12 AT+CGREG GPRS Network Registration Status
AT+CGREG
write command enables presentation of URC "
+CGREG
:
<stat>
" when
<n>
=1 and ME's GPRS net-
work registration status changes, or URC "
+CGREG
:
<stat>
,
<lac>
,
<ci>
" when
<n>
=2 and the current net-
work cell changes.
AT+CGREG
read command queries the current URC presentation status and
<stat>
which shows whether the
network has currently indicated the registration of the ME. Location information elements
<lac>
and
<ci>
are
returned only if
<n>
=2 and ME is registered to the network.
Syntax
Unsolicited Result Codes
URC 1
+CGREG: <stat>
Indicates a change in the ME's GPRS network registration status.
URC 2
+CGREG: <stat> , <lac> , <ci>
Indicates a change in the ME's GPRS network registration status or a change of the network cell including
location information.
Parameter Description
0 (&F)(P) Disable network registration unsolicited result code
1 Enable network registration URC "
+CGREG
:
<stat>
"
2 Enable network registration URC "
+CGREG
:
<stat>
,
<lac>
,
<ci>
"
Test Command
AT+CGREG=?
Response(s)
+CGREG:
(list of supported
<n>
s)
OK
Read Command
AT+CGREG?
Response(s)
+CGREG: <n>
,
<stat>
[,
<lac>
,
<ci>
]
OK
Write Command
AT+CGREG=
[
<n>
]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 + + + + + + + - + -
<n>
(num)