Siemens AC75 - Manual (Page 569)

AC75 AT Command Set
23.8 Alphabetical List of AT Commands
s
AC75_ATC_V01.002 Page 569 of 569 10/30/06
Confidential / Released
ATS10
Set disconnect delay after indicating the absence of data
carrier
Section 7.16 , page 174
ATS18
Extended call release report Section 3.5 , page 101
ATS3
Set command line termination character Section 22.2 , page 530
ATS4
Set response formatting character Section 22.3 , page 531
ATS5
Write command line editing character Section 22.4 , page 532
ATS6
Set pause before blind dialing Section 7.13 , page 171
ATS7
Set number of seconds to wait for connection completion Section 7.14 , page 172
ATS8
Set number of seconds to wait for comma dialing modifier Section 7.15 , page 173
ATT
Select tone dialing Section 7.30 , page 193
ATV
Set result code format mode Section 2.5 , page 38
ATX
Set CONNECT result code format and call monitoring Section 2.6 , page 39
ATZ
Set all current parameters to user defined profile Section 2.8 , page 41
AT Command Description Section and Page