3 at+frh receive data using hdlc framing, At+frh, Ac75 at command set – Siemens AC75 User Manual
Page 354
Advertising
AC75 AT Command Set
12.3 AT+FRH
s
AC75_ATC_V01.002
Page 354 of 569
10/30/06
Confidential / Released
12.3
AT+FRH Receive Data Using HDLC Framing
The
command enables the TA to receive frames using the HDLC protocol and the modulation scheme
=3.
An ERROR response code results if the write command is issued while the modem is on-hook. The test com-
mand can be used either in on-hook or off-hook mode to check the value supported by the
parameter.
Syntax
Note
• AC75 supports only
Test Command
AT+FRH=?
Response(s)
+FRH:
s)
OK
Write Command
Response(s)
CONNECT
If error is related to ME functionality
ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578
-
+
-
+
+
-
-
-
-
-
Advertising