Siemens AC75 - Manual (Page 222)

AC75 AT Command Set
8.15 AT+CPOL
s
AC75_ATC_V01.002 Page 222 of 569 10/30/06
Confidential / Released
8.15 AT+CPOL Preferred Operator List
The
AT+CPOL
read command returns the list of the preferred operators. The
AT+CPOL
write command allows to
edit the list of the preferred operators. If
<index>
is given but
<operator>
is left out, the entry is deleted. An
operator can be only once in the list.
Syntax
Parameter Description
The order number of the operator in the SIM preferred operator list.
2 Numeric format
Operator in numeric format (GSM Location Area Identification number which consists of a 3-digit country code
plus a 2- or 3-digit network code).
Test Command
AT+CPOL=?
Response(s)
+CPOL:
(list of supported
<index>
s), (list of supported
<format>
s)
OK
ERROR
+CME ERROR
Read Command
AT+CPOL?
Response(s)
+CPOL: <index>
,
<format>
,
<operator>
+CPOL:
...
OK
ERROR
+CME ERROR
Write Command
AT+CPOL= <index>
[,
<format>
,
<operator>
]
Response(s)
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 + + + + + + + - + -
<index>
(num)
<format>
(num)
<operator>
(str)