Siemens AC75 - Manual (Page 272)

AC75 AT Command Set
10.4 AT^SISI
s
AC75_ATC_V01.002 Page 272 of 569 10/30/06
Confidential / Released
10.4 AT^SISI Internet Service Information
AT^SISI
serves to monitor the status of Internet service profiles defined with
AT^SISS
.
The
AT^SISI
read command requests the current status of all defined Internet service profiles.
The
AT^SISI
write command requests the status of the specified Internet service profile. If the specified service
profile is not defined yet, "+CME ERROR" is returned.
Syntax
Test Command
AT^SISI=?
Response(s)
[^SISI:(list of defined
<srvProfileId>
s)]
OK
Read Command
AT^SISI?
Response(s)
If response is related to service profile(s) created / opened on this interface:
[^SISI:
<srvProfileId>
,
<srvState>
,
<rxCount>
,
<txCount>
,
<ackData>
,
<unackData>
]
[^SISI: ...]
If response is related to service profile(s) created / opened on other interface(s):
[^SISI:
<srvProfileId>
,
<srvParmTag>
value "srvType"]
[^SISI: ...]
OK
ERROR
Write Command
AT^SISI= <srvProfileId>
Response(s)
^SISI: <srvProfileId>
,
<srvState>
,
<rxCount>
,
<txCount>
,
<ackData>
,
<unackData>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
- + + + + + + - + -