Siemens AC75 - Manual (Page 393)

AC75 AT Command Set
13.21 AT^SCMW
s
AC75_ATC_V01.002 Page 393 of 569 10/30/06
Confidential / Released
13.21 AT^SCMW Write Concatenated Short Messages to Memory
Writing a concatenated message to the memory is similar to writing a "normal" message, except that each seg-
ment of the concatenated message must be identified by the additional parameters
<seq>
,
<ieia>
and
<ref>
.
To store all segments of the message one by one, the
AT^SCMW
write command must be executed for each seg-
ment.
The write commands transmits one segment of a concatenated SMS (either SMS-DELIVER or SMS-SUBMIT)
from TE to memory storage
<mem2>
. Memory location
<index>
of the stored message is returned. Message
status will be set to 'stored unsent' unless otherwise given in parameter
<stat>
.
Syntax
Notes
• Command is only available if
AT+CMGF
=1.
• To send or delete a concatenated short message please use the known SMS commands, see
AT+CMSS
for
sending and
AT+CMGD
for deleting.
• See notes provided for
AT+CMGW
.
Test Command
AT^SCMW=?
Response(s)
OK
Write Command
If text mode (see
AT+CMGF
=1)
AT^SCMW= <oa>
/
<da>
, [
<tooa>
/
<toda>
][,
<stat>
],
<seq>
,
<max>
,
<ieia>
,
<ref> <CR>
Text can be
entered.
<CTRL-Z>
/
<ESC>
Response(s)
^SCMW: <index>
OK
If writing fails
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS + + + + + + + - + -