Siemens AC75 - Manual (Page 85)

AC75 AT Command Set
3.3 AT^SIND
s
AC75_ATC_V01.002 Page 85 of 569 10/30/06
Confidential / Released
3.3 AT^SIND Extended Indicator Control
Designed for extended event indicator control
AT^SIND
• offers greater flexibility than the standard command
AT+CIND
,
• offers several extra indicators,
• can show the current status of all indicators supported by
AT+CIND
and
AT^SIND
,
• can be used to register or deregister the indicators of both commands,
• displays all indicator event reports via "
+CIEV
" URCs.
Presentation mode of the generated URCs is controlled via
AT+CMER
.
The
AT^SIND
read command provides a list of all indicators supported by
AT+CIND
and
AT^SIND
. Each indica-
tor is represented with its registration mode and current value.
The
AT^SIND
write command can be used to select a single indicator in order to modify its registration and to
view the current value.
Syntax
Test Command
AT^SIND=?
Response(s)
^SIND:
(
<indDescr>
, list of supported
<indValue>
s)[, (
<indDescr>
, list of supported
<indValue>
s)[,
...]], (list of supported
<mode>
s)
OK
Read Command
AT^SIND?
Response(s)
^SIND: <indDescr>
,
<mode>
,
<indValue>
^SIND: <indDescr>
,
<mode>
,
<indValue>
,
<eonsOperator>
,
<servProvider>
^SIND: <indDescr>
,
<mode>
,
<nitzUT>
,
<nitzTZ>
,
<nitzDST>
[^SIND:
<indDescr>
,
<mode>
,
<indValue>
]
...
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SIND= <indDescr>
,
<mode>
Response(s)
^SIND: <indDescr>
,
<mode>
,
<indValue>
In case of:
<indDescr>
="eons" and
<mode>
=2
^SIND: <indDescr>
,
<mode>
,
<indValue>
,
<eonsOperator>
,
<servProvider>
In case of:
<indDescr>
="nitz" and
<mode>
=2
^SIND: <indDescr>
,
<mode>
,
<nitzUT>
,
<nitzTZ>
,
<nitzDST>
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS - + + + + + + - + -