Facility, Spic, Code – Siemens AC75 User Manual

Page 131: Ac75 at command set

Advertising
background image

AC75 AT Command Set

5.3 AT^SPIC

s

AC75_ATC_V01.002

Page 131 of 569

10/30/06

Confidential / Released

Password for which the corresponding PIN counter is to be displayed.
“SC“

SIM PIN or SIM PUK. If the SIM PIN has been deactivated after three failed

attempts, the counter for SIM PUK will be returned instead.

“PS“

"Phone code" or "device code" (cf.

AT+CLCK

and

AT+CPWD

). If incorrectly

entered three times, the Master Phone Code is required to lift the lock and the

number of remaining attempts for the master phonecode will be returned.

“P2“

SIM PIN2 or SIM PUK2. If the SIM PIN2 has been deactivated after three failed

attempts, the counter for SIM PUK2 will be returned instead.

“PN“

Network Personalisation

Identification of the currently required password.
SIM PIN

ME is waiting for SIM PIN1.

SIM PUK

ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to

enter PIN1.

SIM PIN2

ME is waiting for PIN2, when the attempt to access PIN2 requiring features was

acknowledged with +CME ERROR:17 (e.g. if the user attempts to edit the FD

phonebook).

SIM PUK2

ME is waiting for PUK2 to unblock a disabled PIN2. Necessary if preceding

command was acknowledged with +CME ERROR:18.

PH-SIM PIN

ME is waiting for phone-to-SIM card password if ''PS'' lock is active and user

inserts other SIM card than the one used for the lock. (''PS'' lock is also referred

to as phone or antitheft lock).

PH-SIM PUK

ME is waiting for Master Phone Code, if the above ''PS'' lock password was

incorrectly entered three times.

PH-NET PUK

ME is waiting for network personalisation unblocking password

Notes

• Whenever the required password changes,

<counter>

changes to reflect that change. Please refer to the

examples below.

• For passwords associated to the phone lock (''PS'' lock set by user or factory) or other factory set locks, such

as ''PF'', ''PN'', ''PU'', ''PP'', ''PC'' the number of attempts is subject to a timing algorithm explained in

AT+CPIN

. If these passwords are incorrectly entered the counter first returns 3, 2 and 1 remaining attempt(s),

but then gives the total number of attempts which amounts to 63 (see example below).

• See also Chapters

AT+CLCK

,

AT+CPIN

,

AT+CPIN2

,

AT+CPWD

,

AT^SLCK

for further information on locks and

passwords.

Examples

EXAMPLE 1

The user fails to provide a correct SIM PIN three times. The counter decreases each time. After the counter

reaches zero, the SIM PUK is required. After each failure to enter a correct SIM PUK, the counter decreases.

<facility>

(str)

<code>

(text)

at+cpin?

+CPIN: SIM PIN

OK

Currently required password is PIN1.

at^spic

^SPIC: 3

OK

3 attempts left.

at+cpin=9999

+CME ERROR: incorrect password

Advertising