Siemens AC75 - Manual (Page 242)

AC75 AT Command Set
9.9 AT+CLIP
s
AC75_ATC_V01.002 Page 242 of 569 10/30/06
Confidential / Released
9.9 AT+CLIP Calling Line Identification Presentation
This command refers to the GSM supplementary service CLIP (Calling Line Identification Presentation) that
enables a called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile ter-
minated call.
The
AT+CLIP
write command enables or disables the presentation of the CLI at the TE. It has no effect on the
execution of the supplementary service CLIP in the network.
The
AT+CLIP
read command gives the status of
<n>
, and also triggers an interrogation of the provision status
of the CLIP service according to GSM 02.81 (given in
<m>
). If no SIM card is available or the SIM-PIN is not
entered, the command response is "ERROR".
Syntax
Unsolicited Result Code
+CLIP: <number> , <type> , , [, <alpha> ][, <CLI validity> ]
When CLIP is enabled at the TE (and is permitted by the calling subscriber), this URC is delivered after every
"
RING
" or "
+CRING
" URC when a mobile terminated call occurs.
Parameter Description
[0] (&F) Suppress unsolicited result codes
1 Display unsolicited result codes
0 CLIP not provisioned
1 CLIP provisioned
2 Unknown
Test Command
AT+CLIP=?
Response(s)
+CLIP:
(list of supported
<n>
s)
OK
Read Command
AT+CLIP?
Response(s)
+CLIP: <n>
,
<m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CLIP= <n>
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07, GSM 02.81 ± + + + + + + - - -
<n>
(num)(&W)(&V)
<m>
(num)(&V)