Cpin, Code, New pin – Siemens AC75 User Manual

Page 125: Ac75 at command set

Advertising
background image

AC75 AT Command Set

5.1 AT+CPIN

s

AC75_ATC_V01.002

Page 125 of 569

10/30/06

Confidential / Released

Parameter Description

Password (string type), usually SIM PIN1.

If the requested password was a PUK, such as SIM PUK1 or PH-FSIM PUK or another password, then

<pin>

must be followed by

<new pin>

.

If the requested code was a PUK: specify a new password or restore the former disabled password. See Section

5.1.1

,

What to do if PIN or password authentication fails?

for more information about when you may need to

enter the PUK.

SIM PIN authentication
READY

PIN has already been entered. No further entry needed.

SIM PIN

ME is waiting for SIM PIN1.

SIM PUK

ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to

enter PIN1.

SIM PIN2

ME is waiting for PIN2. This is only applicable when an attempt to access a

PIN2 related feature was acknowledged with +CME ERROR: 17 ("SIM PIN2

required"), for example when the client attempts to edit the FD phonebook). In

this case the read command

AT+CPIN

? also prompts for SIM PIN2. Normally,

the

AT+CPIN2

command is intended for SIM PIN2.

SIM PUK2

ME is waiting for PUK2 to unblock a disabled PIN2. As above, this is only nec-

essary when the preceding command was acknowledged with +CME ERROR:

18 ("SIM PUK2 required") and only if the read command

AT+CPIN

? also

prompts for SIM PUK2. Normally, the

AT+CPIN2

command is intended for SIM

PUK2.

Phone security locks set by client or factory
PH-SIM PIN

ME is waiting for phone-to-SIM card password if "PS" lock is active and the cli-

ent inserts other SIM card than the one used for the lock. ("PS" lock is also

referred to as phone or antitheft lock).

PH-SIM PUK

ME is waiting for Master Phone Code, if the above "PS" lock password was

incorrectly entered three times.

PH-FSIM PIN

ME is waiting for phone-to-very-first-SIM card. Necessary when "PF" lock was

set. When powered up the first time, ME locks itself to the first SIM card put into

the card holder. As a result, operation of the mobile is restricted to this one SIM

card (unless the PH-FSIM PUK is used as described below).

PH-FSIM PUK

ME is waiting for phone-to-very-first-SIM card unblocking password to be

given. Necessary when "PF" lock is active and other than first SIM card is

inserted.

PH-NET PUK

ME is waiting for network personalisation unblocking password

PH-NS PIN

ME is waiting for network subset personalisation password

PH-NS PUK

ME is waiting for network subset unblocking password

PH-SP PIN

ME is waiting for service provider personalisation password

PH-SP PUK

ME is waiting for service provider personalisation unblocking password

PH-C PIN

ME is waiting for corporate personalisation password

PH-C PUK

ME is waiting for corprorate personalisation un-blocking password

<pin>

(str)

<new pin>

(text)

<code>

(text)

Advertising