Siemens AC75 - Manual (Page 526)

AC75 AT Command Set
21.3 AT^SJOTAP
s
AC75_ATC_V01.002 Page 526 of 569 10/30/06
Confidential / Released
Directory of Java application
Directory on the ME where a new application (JAD and JAR file) is installed. When entering the application direc-
tory with the
AT^SJOTAP
write command be sure that the path name is not terminated with a slash. For example,
type "a:" or "a:/otap" rather than "a:/" or "a:/otap/".
HTTP user name
HTTP password
Bearer Service
“csd“
Use Bearer service "Circuit Switched".
“gprs“ Use Bearer service "GPRS".
Destination
Phone number if
<BS>
="csd" or Access point name (APN)if
<BS>
="gprs".
The phone number can be modified to select between ISDN or analog and to choose the bitrate. The format of
the phone number and the default settings are the same as in the case of
AT^SJNET
(see parameter
<entry
point>
for instructions). Please note that if no additional characters are used to modify the phone number then
the default settings a = analog call and m = 9600 bps are assumed.
User name for accessing the network
Password for accessing the network
Domain Name Server
URL to which result codes are posted
Notes
• The authentication mode for CSD and GPRS is always PAP.
• All parameters which are left out in the write command are set to "not configured", while parameters which
are entered as "" will be stored as an empty string.
• Parameters that have not been configured via AT command, can be configured via SMS (see [3] ).
• Parameters that have been configured via AT command cannot be reconfigured / overwritten via SMS.
• If the execute command ends up with an error, one or more mandatory parameters have not been specified
(see [3] ).
<Appl_Dir>
(str)
<HTTP_User>
(str)
<HTTP_Pwd>
(str)
<BS>
(str)
<Dest>
(str)
<Net_user>
(str)
<Net_pwd>
(str)
<DNS>
(str)
<NotifyURL>
(str)