Siemens AC75 - Manual (Page 291)

AC75 AT Command Set
10.11 AT^SISX
s
AC75_ATC_V01.002 Page 291 of 569 10/30/06
Confidential / Released
Parameter Description
“Ping“ Service type.
0...5 Internet connection profile identifier defined with parameter
<conProfileId>
of
AT^SICS
.
Target host name or IP address for pinging (i.e. 192.168.1.3).
[1]...30 Number of ping requests (ICMP Echo Requests).
200...[5000]...10000 Amount of time, in milliseconds, to wait for an Echo Response message related
to a sent Echo Request message.
Marks the type and format of the information given in the command responses (see syntax of the
AT^SISX
write
command above).
1
Ping response(s) received for the ICMP Echo Request(s). Depending on
parameter
<request>
1 - 30 rows. Address and Round Trip Time are returned
for each request.
2 1-row packet statistic calculated from the ping response(s) received for
<pingInfoType>
=1.
3 1-row time statistics calculated from the ping response(s) received for
<ping-
InfoType>
=1.
Round Trip Time in milliseconds. If the Echo Response message is not received within the time specified by
<timelimit>
the value -1 is returned (e.g. when the bearer shuts down during command execution).
Number of sent packets.
Number of received packets.
Number of lost packets.
Lost packets in percent.
Minimum Round Trip Time in milliseconds.
<service>
(str)
<conProfileId>
(num)
<address>
(str)
<request>
(num)
<timelimit>
(num)
<pingInfoType>
(num)
<roundTripTime>
(num)
<sent>
(num)
<received>
(num)
<lost>
(num)
<lostPercent>
(num)
<minRTT>
(num)