Siemens AC75 - Manual (Page 472)

AC75 AT Command Set
18.14 AT^SNFPT
s
AC75_ATC_V01.002 Page 472 of 569 10/30/06
Confidential / Released
18.14 AT^SNFPT Set progress tones
AT^SNFPT
controls the Call Progress Tones generated at the beginning of a mobile originated call setup.
Please note that the setting is stored volatile, i.e. after restart or reset, the default value 1 will be restored.
Syntax
Parameter Description
0 Disables Call Progress Tones
1 (P) Enables Call Progress Tones (audible tones shortly heard on the phone when
ME starts to set up a call.)
Test Command
AT^SNFPT=?
Response(s)
^SNFPT:
(list of supported
<pt>
s)
OK
Read Command
AT^SNFPT?
Response(s)
^SNFPT: <pt>
OK
Write Command
AT^SNFPT= <pt>
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS - + + + + + + - + -
<pt>
(num)