Siemens AC75 - Manual (Page 174)

AC75 AT Command Set
7.16 ATS10
s
AC75_ATC_V01.002 Page 174 of 569 10/30/06
Confidential / Released
7.16 ATS10 Set disconnect delay after indicating the absence of data
carrier
Syntax
Command Description
This parameter setting determines the amount of time, that the TA remains connected in absence of a data car-
rier. If the data carrier is detected before disconnect, the TA remains connected.
Parameter Description
number of tenths of seconds of delay
001...2
(&F) ...254
Read Command
ATS10?
Response(s)
<n>
OK
Write Command
ATS10= <n>
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 - + - + + - - - + -
<n>
(num)(&W)(&V)