Siemens AC75 - Manual (Page 522)

AC75 AT Command Set
21.2 AT^SJNET
s
AC75_ATC_V01.002 Page 522 of 569 10/30/06
Confidential / Released
21.2 AT^SJNET Set Dialup Network Access Parameters
The
AT^SJNET
write command allows to create a profile which contains all parameters needed for automated
network access through a dialup connection.
Syntax
Test Command
AT^SJNET=?
Response(s)
^SJNET:
("csd"|"gprs"), ("Tel. num."|"access point name"), ("login"), ("password"), ("dns"), (list of supported
<timeout>
s)
OK
Read Command
AT^SJNET?
Response(s)
^SJNET: <bearer service>
,
<entry point>
,
<login>
,
<password>
,
<dns>
,
<timeout>
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SJNET= <bearer service>
,
<entry point>
,
<login>
,
<password>
[
<dns>
][,
<timeout>
]
Response(s)
^SJNET: <bearer service>
,
<entry point>
,
<login>
,
<password>
,
<dns>
,
<timeout>
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS - + + + + + + - + -