3 at^sstgi sat get information, At^sstgi, Nd, e.g – Siemens AC75 User Manual
Page 431: Ac75 at command set
AC75 AT Command Set
16.3 AT^SSTGI
s
AC75_ATC_V01.002
Page 431 of 569
10/30/06
Confidential / Released
16.3
AT^SSTGI SAT Get Information
Regularly this command is used upon receipt of an URC "
" to request the parameters of the Proactive
Command.
Then the TA is expected to acknowledge the
response with
Command has been executed.
will also provide any user information, e.g. a selected menu item.
The Proactive Command type value specifies to which "
" the command is related.
Syntax
Parameter Description
AC75 Remote-SAT interface states
0
RESET
1
OFF
2
IDLE
3
PAC
4
WAIT
Related Proactive Command
Test Command
AT^SSTGI=?
Response(s)
^SSTGI:
(list of supported
s), (list of supported
s)
OK
Read Command
AT^SSTGI?
Response(s)
^SSTGI:
OK
Write Command
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
-
+
+
+
+
+
+
-
+
-
<state>
(num)
<cmdType>
(num)