Siemens AC75 - Manual (Page 323)

AC75 AT Command Set
11.8 AT+CGEQREQ
s
AC75_ATC_V01.002 Page 323 of 569 10/30/06
Confidential / Released
11.8 AT+CGEQREQ 3G Quality of Service Profile (Requested)
Syntax
Command Description
The test command returns values supported as a compound value.
The read command returns the current settings for each defined context.
The write command allows the TE to specify a Quality of Service Profile for the context identified by the (local)
context identification parameter
<cid>
which is used when the MT sends an Activate PDP Context Request
message to the network.
A special form of the write command,
AT+CGEQREQ
=
<cid>
causes the requested profile for context number
<cid>
to become undefined.
AT&F
and
ATZ
will undefine the QoS profiles of every context which is not active or not online.
Parameter Description
Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is
used in other PDP context-related commands.
1...2
Test Command
AT+CGEQREQ=?
Response(s)
+CGEQREQ: <PDP_type>
, (list of supported
<Traffic class>
s), (list of supported
<Maximum bitrate
UL>
s), (list of supported
<Maximum bitrate DL>
s), (list of supported
<Guaranteed bitrate UL>
s),
(list of supported
<Guaranteed bitrate DL>
s), (list of supported
<Delivery order>
s), (list of
supported
<Maximum SDU size>
s), (list of supported
<SDU error ratio>
s), (list of supported
<Residual bit error ratio>
s), (list of supported
<Delivery of erroneous SDUs>
s), (list of
supported
<Transfer delay>
s), (list of supported
<Traffic handling priority>
s)
OK
Read Command
AT+CGEQREQ?
Response(s)
[+CGEQREQ:
<cid>
,
<Traffic class>
,
<Maximum bitrate UL>
,
<Maximum bitrate DL>
,
<Guaranteed bitrate UL>
,
<Guaranteed bitrate DL>
,
<Delivery order>
,
<Maximum SDU
size>
,
<SDU error ratio>
,
<Residual bit error ratio>
,
<Delivery of erroneous SDUs>
,
<Transfer delay>
,
<Traffic handling priority>
]
[+CGEQREQ: ...]
Write Command
AT+CGEQREQ=
[
<cid>
[,
<Traffic class>
[,
<Maximum bitrate UL>
[,
<Maximum bitrate DL>
[,
<Guaranteed bitrate UL>
[,
<Guaranteed bitrate DL>
[,
<Delivery order>
[,
<Maximum SDU
size>
[,
<SDU error ratio>
[,
<Residual bit error ratio>
[,
<Delivery of erroneous
SDUs>
[,
<Transfer delay>
[,
<Traffic handling priority>
]]]]]]]]]]]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
3GPP TS 27.007 + + + + + + + - + -
<cid>
(num)