Siemens AC75 - Manual (Page 37)

AC75 AT Command Set
2.4 ATQ
s
AC75_ATC_V01.002 Page 37 of 569 10/30/06
Confidential / Released
2.4 ATQ Set result code presentation mode
This parameter setting determines whether or not the TA transmits any result code to the TE. Information text
transmitted in response is not affected by this setting.
Syntax
Parameter Description
[0] (&F) DCE transmits result code
1 Result codes are suppressed and not transmitted
Note
• If Java is running, the firmware will ignore the command. Responses will be invalid or result in "ERROR". See
also "AC75 Java User's Guide" [3] , Section "Configuring serial interface".
Exec Command
ATQ
[
<n>
]
Response(s)
If
<n>
=0:
OK
If
<n>
=1:
(none)
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 - + + + + + + - + -
<n>
(num)(&W)(&V)