Siemens AC75 - Manual (Page 273)

AC75 AT Command Set
10.4 AT^SISI
s
AC75_ATC_V01.002 Page 273 of 569 10/30/06
Confidential / Released
Parameter Description
Internet service profile identifier as defined by
AT^SISS
(
<srvProfileId>
).
0...9
Internet service state (for details see
AT^SISO
parameter
<srvState>
).
2 Allocated
3 Connecting
4 Up
5 Closing
6 Down
Number of bytes received via
AT^SISR
since last successful
AT^SISO
write command.
This is the same value as displayed by the
AT^SISO
read command with the parameter
<rxCount>
.
Number of bytes sent via
AT^SISW
since last successful
AT^SISO
write command.
This is the same value as displayed by the
AT^SISO
read command with the parameter
<txCount>
.
Number of data bytes already sent and acknowledged at TCP layer. Value 0 indicates that no sent data is
acknowledged yet.
Parameter is not applicable to HTTP, POP3, SMTP and Socket with UDP. For these services the counter is
always set to 0.
Number of data bytes already sent but not yet acknowledged at TCP layer. A value 0 indicates that all sent data
is already acknowledged.
This is the same value as displayed in the response of the
AT^SISW
write command with the parameter
<unackData>
.
Parameter is not applicable to HTTP, POP3, SMTP and Socket with UDP. For these services the counter is
always set to 0.
Note
• If a service is in state "Down" the responses for
<rxCount>
,
<txCount>
,
<ackData>
and
<unackData>
are the last known values for the service in the states "Connecting", "Up" and "Closing".
<srvProfileId>
(num)
<srvState>
(num)
<rxCount>
(num)
<txCount>
(num)
<ackData>
(num)
<unackData>
(num)