Siemens AC75 - Manual (Page 438)

AC75 AT Command Set
17.4 AT+CPBS
s
AC75_ATC_V01.002 Page 438 of 569 10/30/06
Confidential / Released
17.4 AT+CPBS Select phonebook memory storage
AT+CPBS
selects the active phonebook storage, i.e. the phonebook storage that all subsequent phonebook com-
mands will be operating on.
The read command returns the currently selected
<storage>
, the number of
<used>
entries and the
<total>
number of entries available for this storage. The test command returns all supported
<storage>
s as compound
value.
Syntax
Parameter Description
“FD“ Fixed dialing phonebook
Capacity: depending on SIM card
Location: SIM
“SM“ (&F) SIM phonebook
Capacity: depending on SIM card
Location: SIM
“ON“ MSISDN list
Capacity: depending on SIM card
Location: SIM
“ME“ Mobile Equipment Phonebook
Capacity: max. 250 entries
Location: ME
“LD“ Last number dialed phonebook. Stores all voice call numbers dialed with ATD,
but no data call numbers.
Capacity: max. 10 entries
Location: depending on SIM this phonebook may reside partly or completely in
ME
AT+CPBW
command is not applicable to this storage. The LD list can be deleted
with
AT^SDLD
or with
AT^SPBD
.
Test Command
AT+CPBS=?
Response(s)
+CPBS:
(list of supported
<storage>
s)
OK
+CME ERROR
Read Command
AT+CPBS?
Response(s)
+CPBS: <storage>
,
<used>
,
<total>
OK
+CME ERROR
Write Command
AT+CPBS= <storage>
Response(s)
OK
+CME ERROR:
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM07.07 + + + + + + + - + -
<storage>
(str)