Siemens AC75 - Manual (Page 531)

AC75 AT Command Set
22.3 ATS4
s
AC75_ATC_V01.002 Page 531 of 569 10/30/06
Confidential / Released
22.3 ATS4 Set response formatting character
The
ATS4
command determines the character generated by the TA for result code and information text.
Syntax
Parameter Description
response formatting character
000...10
(&F) ...127
Note
• Whenever you change the setting take into account that the new value has no effect on the URC "
^SHUT-
DOWN
".
Read Command
ATS4?
Response(s)
<n>
OK
Write Command
ATS4= <n>
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250 - + + + + + + - + -
<n>
(num)(&W)(&V)