Siemens AC75 - Manual (Page 180)

AC75 AT Command Set
7.21 AT+CLCC
s
AC75_ATC_V01.002 Page 180 of 569 10/30/06
Confidential / Released
7.21 AT+CLCC List current calls of ME
The execute command returns a list of current calls of ME. If command is successful, but no calls are available,
no information response is sent to TE.
Syntax
Parameter Description
Call identification number as described in GSM02.30 subclause 4.5.5.1; this number can be used in
AT+CHLD
command operations
0 Mobile originated call (MOC)
1 Mobile terminated call (MTC)
State of the call
0
Active
1 Held
2 Dialing (MOC)
3 Alerting (MOC)
4 Incoming (MTC)
5 Waiting (MTC)
Bearer/teleservice
0
Voice
1 Data
2 Fax
Test Command
AT+CLCC=?
Response(s)
OK
Exec Command
AT+CLCC
Response(s)
[+CLCC:
<idx>
,
<dir>
,
<stat>
,
<mode>
,
<mpty>
[,
<number>
,
<type>
[,
<alpha>
]]]
[+CLCC:
<idx>
,
<dir>
,
<stat>
,
<mode>
,
<mpty>
[,
<number>
,
<type>
[,
<alpha>
]]]
[+CLCC: ...]
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 + + + + + + + - - -
<idx>
(num)
<dir>
(num)
<stat>
(num)
<mode>
(num)