Siemens AC75 - Manual (Page 327)

AC75 AT Command Set
11.9 AT+CGPADDR
s
AC75_ATC_V01.002 Page 327 of 569 10/30/06
Confidential / Released
11.9 AT+CGPADDR Show PDP address
Syntax
Command Description
The test command returns a list of defined
<cid>
s.
The write command returns a list of PDP addresses for the specified context identifiers. If no
<cid>
is specified,
the addresses for all defined contexts are returned.
Parameter Description
A numeric parameter which specifies a particular PDP context definition (see
AT+CGDCONT
command).
A string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic.
Note
• If no
<cid>
is specified, the write command will return a list of all defined contexts.
Test Command
AT+CGPADDR=?
Response(s)
[+CGPADDR: (list of defined
<cid>
s)]
OK
Write Command
AT+CGPADDR=
[
<cid>
[,
<cid>
]]
Response(s)
[+CGPADDR:
<cid>
,
<PDP_address>
]
[+CGPADDR:
<cid>
,
<PDP_address>
]
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 + + + + + + + - + -
<cid>
(num)
<PDP_address>
(str)