Siemens AC75 - Manual (Page 395)

AC75 AT Command Set
13.23 AT^SMGL
s
AC75_ATC_V01.002 Page 395 of 569 10/30/06
Confidential / Released
13.23 AT^SMGL List Short Messages from preferred store without set-
ting status to REC READ
The write command allows to select a status type and lists, from the message storage
<mem1>
, all messages
that currently have the specified
<stat>
. The major difference over the standard command
AT+CMGL
is that the
status of the listed messages remains u n c h a n g e d (unread remains unread).
The execute command is the same as the write command, but uses the given default of
<stat>
.
Syntax
Notes
• The selected
<mem1>
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 23.1 , Restricted access to SIM data after SIM PIN authentication for further detail.
• If the ME is Java controlled, take into account that the AT Command API can handle responses up to a length
of 1024 bytes. To avoid any longer re-sponses it is recommended not to read the entire range of short mes-
sage entries at a time.
Test Command
AT^SMGL=?
Response(s)
same as
AT+CMGL
Exec Command
AT^SMGL
Response(s)
^SMGL:
(For default values of
<stat>
, see "Section 13.1 , SMS parameters .)
OK
Write Command
AT^SMGL= <stat>
Response(s)
same as
AT+CMGL
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS + + + + + + + - + -