Altera Arria V Hard IP for PCI Express - Manual (Page 32)

2–16 Chapter 2: Getting Started with the Arria Hard IP for PCI Express
Compiling the Design in the Qsys Design Flow
Arria V Hard IP for PCI Express December 2013 Altera Corporation
User Guide
2. Click the browse button next the File name box and browse to the
gen1_x4_example_design/altera_pcie_ <dev>_ip_ast/pcie_de_gen1_x4_ast64/
synthesis/ directory.
3. On the Quartus II File menu, click New, then New Quartus II Project, then OK.
4. Click Next in the New Project Wizard: Introduction (The introduction does not
appear if you previously turned it off.)
5. On the Directory, Name, Top-Level Entity page, enter the following information:
a. The working directory shown is correct. You do not have to change it.
b. For the project name, click the browse buttons and select your variant name,
pcie_de_gen1_x4_ast64 then click Open. r
1 If the top-level design entity and Qsys system names are identical, the
Quartus II software treats the Qsys system as the top-level design entity.
6. Click Next to display the Add Files page.
7. Complete the following steps to add the Quartus II IP File (.qip) to the project:
a. Click the browse button. The Select File dialog box appears.
b. In the Files of type list, select IP Variation Files (*.qip).
c. Click pcie_de_gen1_x4_ast64.qip and then click Open.
d. On the Add Files page, click Add, then click OK.
8. Click Next to display the Device page.
9. On the Family & Device Settings page, choose the following target device family
and options:
a. In the Family list, select Arria V (GT/GX/ST/SX)
b. In the Devices list, select Arria V GX Extended Features GX PCIe
c. In the Available devices list, select 5AGXFB3H6F35C6ES.
10. Click Next to close this page and display the EDA Tool Settings page.
11. Click Next to display the Summary page.
12. Check the Summary page to ensure that you have entered all the information
correctly.
13. Click Finish to create the Quartus II project.