Programmable logic setting commands, Programmable logic setting commands -15 – Basler Electric BE1-851 User Manual
Page 257
SG-IN Command
Purpose:
Read/Set Input recognition/debounce
Syntax:
SG-IN[#[={r(ms)},{db(ms)}]] where ms=1-255msec
Example:
SG-IN or SG-IN3 or SG-IN3=4,16
Reference:
Section 3, Input and Output Functions, Contact Sensing Inputs
SG-PHROT Command
Purpose:
Read/Set Phase Rotation setting
Syntax:
SG-PHROT[={phase rotation 1/2}] where 1=ABC, 2=ACB
Example:
SG-PHROT or SG-PHROT=2
Reference:
Section 3, Input and Output Functions, Current Inputs
SG-SCREEN Command
Purpose:
Read/Set default screen(s)
Syntax:
SG-SCREEN[n][={default screen number}]
Example:
SG-SCREEN or SG-SCREEN1=2.2.1 or SG-SCREEN2=2.2.2
Reference:
Section 10, Human-Machine Interface, Front Panel Display
SG-SGCON Command
Purpose:
Read/Set SGC output on time
Syntax:
SG-SGCON[={time}] where time is in (m)sec, (s)ec or (c)ycles
Example:
SG-SGCON or SG-SGCON=1S or SG-SGCON = 500m
Reference:
Section 4, Protection and Control, Setting Groups
SG-TARG Command
Purpose:
Report/Enable Target List and Reset Target Logic
Syntax:
SG-TARG[={x/x/..x},{rst TARG logic}] where x=50,51,150 etc.
Example:
SG-TARG or SG-TARG=51/50TA/50TB/50TC/50TN/50TQ/150
Reference:
Section 6, Reporting and Alarms, Fault Reporting
SG-TRIGGER Command
Purpose:
Read/Set Trigger logic
Syntax:
SG-TRIGGER[={TRIP trigger},{PU trigger},{LOGIC trigger}]
Example:
SG-TRIGGER or SG-TRIGGER=VO1,VO12,IN4
Reference:
Section 6, Reporting and Alarms, Fault Reporting
SG-UTC Command
Purpose:
Read/Set UTC information for Daylight Saving Time
Syntax:
SG-UTC[=M,R,B] where M=Offset from UTC in minutes,R=Ref time: 0/1 for local/UTC,
B=DSTBias: The amount in minutes to adjust DST
Example:
SG-UTC, SG-UTC=60,0,60, or SG-UTC=-120,1,60, or local time is UTC-4:15 with UTC
ref, bias is 120 min => SG-UTC=-255,1,120
Reference: Section 6, Reporting and Alarms, Clock
Programmable Logic Setting Commands
SL Command
Purpose:
Obtain Setting Logic Information
Syntax:
SL:[{name}]
Example:
SL, SL: or SL:FEEDER_1
Reference:
Section 11, ASCII Command Interface, Settings (S) Command Descriptions
9289900990 Rev R
BE1-851 ASCII Command Interface
11-15