Grass Valley iControl V.6.02 User Manual
Page 112
Logs
Event Log Viewer
102
--- Alarm properties ---
The fields and menus in this section allow you to enter search criteria based on the properties of the
alarm(s) you are looking for.
Path
Enter an alarm’s path (i.e. where it appears in the GSM Alarm Browser hierarchy)
URI
Enter an alarm’s URI
Name
Enter an alarm’s name
--- Alarm state ---
The fields and menus in this section allow you to enter search criteria based on the state (status) of
the alarm(s) you are looking for.
Previous
Enter the previous status of the alarm(s) you are looking for
New
Enter the new status of the alarm(s) you are looking for
Text
Enter all or part of the text status of the alarm(s) you are looking for
Show state transition
only
Select to display only those logged events with changed alarm states (enabled by default)
--- Query / Update ---
Query
Enter the preset query name whose search criteria you would like to use in a new search.
Go
Click to begin a search of the event log database using the criteria of the query selected in the
Query box.
Auto-update mode
Select to configure Event Log Viewer to automatically refresh the log list.
Update entries in real
time
When the Auto-update mode check box is selected, the Update entries in real time option is
no longer greyed out. The real-time refresh option auto-updates the event log list on a real-time
basis.
2
Refresh every
When the Auto-update mode check box is selected, the Refresh every option is no longer
greyed out. This manual refresh option auto-updates the event log list at the frequency specified
in the Refresh frequency.
3
Refresh frequency
Use the up and down arrows or enter the number of minutes between automatic refreshes of
Event Log Viewer.
--- Columns ---
Timestamp (<Time
Zone>)
The date and time at which the event occurred (e.g.
2008-11-04 16:57:54.437
)
Device type
The type of device associated with the event (e.g.
DCP-1721
)
Device ID (URI)
The URI of the device associated with the event (e.g.
App13_d14_Densité_SLOT_6_35
)
Path
The path of the alarm associated with the event
(e.g.
iControl/Logical View/UAP_Cards/DCP-1721 (App13_d14_Densité_SLOT_6_35)
)
Previous state
The state of the alarm prior to the event (e.g.
Normal
)
Main Event Log Viewer (Continued)
Interface Element
Description