Grass Valley iControl V.6.02 - Manual (Page 509)

iControl
User Guide
499
Changing the Signal Path from the Backup to the Main using the Matrix
Application
After completion of an Engage Failover, the following procedure explains how to return the
signal path from the backup to the main.
The following image shows the signal path from the main to the backup as it should be after
completion of the procedure.
Note: The following procedure includes steps that use the iControl Router Manager
For details about iControl Router Manager configuration, see the iControl Router
Manager Quick Start Guide.
IMPORTANT: The following Failover procedure is applicable only if your iC Web site offers
Failover functionality.