Grass Valley iControl V.6.02 - Manual (Page 150)

Logs
Automatically Configuring Event Logging
140
Automatically Configuring Event Logging
To automatically configure event logging
1. In iC Navigator, do only ONE of the following two actions:
• Click Event log viewer,
OR,
• On the View menu, click Event log viewer.
If there are more than one GSM event log, the General Status Manager Selection window
appears.
2. Select a log event to view, and then click Select.
3. In the Log Viewer, on the File menu, click Log properties.
The Event and incident log configuration window appears.
4. Configure settings as required.
5. Click OK.
A progress window briefly appears, followed by Event Log Viewer.
Manually Configuring Event and Incident Logging
REQUIREMENT
Before beginning this procedure, make sure you have opened iC Navigator (see page 566 ).
Note: The default configuration settings are suitable for most iControl users. For
more information on configuration options, see
"Event & Incident Log
Configuration" , on page 127.
REQUIREMENT
Before beginning this procedure, make sure you have opened GSM Alarm Browser
(see
"Opening the GSM Alarm Browser" , on page 577).