Grass Valley iControl V.6.02 - Manual (Page 331)

iControl
User Guide
321
To set the view of an operational mode in iC Navigator
• On the View menu of iC Navigator, point to Operational mode, and then click Offline or
In maintenance (or both) as required:
There are several different system behaviors that occur depending on how you have
configured iControl to display alarms.
Alarm Browser
The Alarm Browser is a window, accessible from within iC Navigator and elsewhere, used to
view, create, modify and remove alarms. It provides access to alarms for both Grass Valley and
third party devices. The information that appears in the Alarm Browser is generated by a
specific GSM.
IMPORTANT: System behavior
An operational mode view only applies for the particular client session
where it was enabled. The view of other users remains unaffected.
See also
For more information about system behaviors after you have configured iControl to display
alarms based on their operational modes, see
"System Behaviors After Configuring the
Display Settings of Alarms" , on page 317.