Grass Valley iControl V.6.02 - Manual (Page 369)

iControl
User Guide
359
Working with Operational Modes
Setting an Alarm’s Operational Mode
To edit an alarm’s Offline, In maintenance, or Inverted mode
• Right-click the alarm, point to Operational mode, and then click one of Offline, In
maintenance, or Inverted.
The color of the alarm’s status icon changes to a darker shade, and the text label (if any)
becomes orange.
Checking the Operational Mode of an Alarm
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• If you are working in iC Web, make sure you have opened the appropriate iControl Web
page (see page 581 ).
• If you are working in iC Navigator, make sure you have opened iC Navigator
(see page 566 ).
See also
For more information about:
• the Inverted operational mode, see "Inverted" , on page 313.
• manual alarm inversions, see "Manual Alarm Inversions" on page 329 and "Inverting
Alarms Manually" on page 362.
• scheduling inversion actions, see "Setting a Schedule for an Alarm Inversion" ,
on page 366.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• If you are working in iC Web, make sure you have opened the appropriate iControl Web
page (see page 581 ).
• If you are working in iC Navigator, make sure you have opened iC Navigator
(see page 566 ).