Grass Valley iControl V.6.02 - Manual (Page 392)

iControl and SNMP
Creating SNMPv3 User Profiles
382
Selecting MD5 as authentication protocol
As shown, the three user templates created have the following characteristics:
Creating SNMPv3 User Profiles
To create an SNMPv3 user profile
1. In your PuTTY secure shell, create a new user profile:
./usersnmpv3 create
Table 8-1: User template passwords and their security parameters
User template name Authentication? Privacy? Authentication
password
Privacy password
userNone NO NO
userAuthPriv YES YES initpassword privpassword
userAuthNoPriv YES NO initpassword
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• Default user templates currently exist on this Application Server. To verify that they exist,
perform the list command. (see "Miscellaneous User Configuration Tasks" ,
on page 385). The SNMPv3 commissioning procedure has already been performed once
for this Application Server (see
page 381 ).
• You have logged into your Application Server with a PuTTY secure shell and have
changed directories to iControl’s snmpd directory (see page 380 ).
• [RECOMMENDED]: You are performing this procedure as a task within the context of an
approved workflow (see "[Workflow]: Configuring SNMPv3 User Profiles in iControl" ,
on page 377).