Grass Valley iControl V.6.02 - Manual (Page 398)

iControl and SNMP
Enabling iControl to run a Custom SNMP Driver
388
Enabling iControl to run a Custom SNMP Driver
To enable iControl to run a custom SNMP driver
1. In iC Navigator, double-click on a GSM to open its Alarm Browser window.
2. In the Create new alarm provider list, select SNMP - Generic manager, and then click
New.
Note: The SNMP agent on the device must be enabled. Please consult the
documentation that came with the device for instructions.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• There is an active connection between the iControl Application Server and the SNMP
device.
• You have opened iC Navigator (see page 566 ).
Folder and alarms specific
to the SNMP device Status of the SNMP
driver instance