Grass Valley iControl V.6.02 - Manual (Page 224)

Configuring Devices & Services
Working with Densité Communicators
214
The Densité Manager control panel appears.
The Configuration tab contains a list of currently configured Densité Communicators. The
first time that you access the Densité Manager, this list will be empty. You must manually
add the IP address and name of each Densité frame that is to be controlled. The Status bar
located at the bottom of the control panel displays Error, Warning and Information
messages.
If you select a Densité Communicator (frame) from the list, you can take one of the following
actions:
• Click Remove to delete the Communicator from the list. If the Communicator had
been added to an iC Web page, the alarm for that element will turn red.
• Click Reset to stop and then restart the selected Communicator.
• Click Standby to interrupt the data flow to and from the Densité frame.
• Click Online to restore the data flow to and from the Densité frame.
5. Click Add to add a new Densité Communicator (frame) to the list.
The Target Information window appears.
6. Under Server Type, select standalone.
7. Type the Densité frame’s IP address and a descriptive name in the fields provided. These are
used to define the alarm IDs in the GSM.
Note: Use Reset when, for example, cards known to be in the frame do not appear
in the iC Navigator window.
Note: If the name or IP address for an existing frame is modified at a later date, any
iC Web pages referring to this frame may no longer work.