Grass Valley iControl V.6.02 - Manual (Page 159)

iControl
User Guide
149
OR,
• In the Text field, click the Down arrow, and then select from the list of textual choices.
Searching the Log Database by Executing a Stored Query
To search the log database by executing a stored query
1. In the log viewer, in the Query list (next to the Go button), click the query you wish to
execute.
2. Click Go.
The system returns search results based on the query’s criteria.
Filtering Currently Displayed Log Results with Additional Criteria
To filter currently displayed log results with additional criteria
1. In the log viewer, in the current results, find any incident or event possessing the criterion
you would like to add.
Note: In this procedure, the term log viewer refers to either Event Log Viewer or
Incident Log Viewer, depending on which one you are using.
REQUIREMENT
Before beginning this procedure, make sure you have opened either Event Log Viewer or
Incident Log Viewer, as required (see
"Opening Event Log Viewer" and see "Opening
Incident Log Viewer" , on page 569).
Note: In this procedure, the term log viewer refers to either Event Log Viewer or
Incident Log Viewer, depending on which one you are using.
REQUIREMENT
Before beginning this procedure, make sure you have opened either Event Log Viewer or
Incident Log Viewer, as required (see
"Opening Event Log Viewer" and see "Opening
Incident Log Viewer" , on page 569).