Grass Valley iControl V.6.02 - Manual (Page 594)

Common Tasks
Opening an Existing Site
584
2. Browse to the location you wish to save your new site. Type a file name (do not use spaces),
and then click Create site folder.
The iC Creator main window appears.
Opening an Existing Site
To open an existing (locally stored) site
1. In the iC Creator Welcome window, select Open an existing site, and then click Next.
The Welcome to iControl Web Creator window appears, showing options for opening a
local or remote site.
2. Click Browse ( ) beside the Open local site field.
The Open site window appears.
3. Locate and select the folder that has the Web site name you want to open, and then click
Open site folder.
The iC Creator main window appears.
Opening an Existing Remote Site
To open an existing remote site
1. In the iC Creator Welcome window, select Open an existing site, and then click Next.
The Welcome to iControl Web Creator window appears, showing options for opening a
local or remote site.
2. In the Open remote site combo box, select or type an IP address for the Application Server
to which the site has been published.
3. Click Open.
The Select site window appears, showing all sites published to that Application Server.
4. Select a site, and then click Open.
The Open pages window appears, showing all pages in the site you are opening.
5. Select a page, and then click Open.
Opening the Privilege Management Window in iC Creator
REQUIREMENT
Before beginning this procedure, make sure you have started iC Creator (see page 583 ).
REQUIREMENT
Before beginning this procedure, make sure you have started iC Creator (see page 583 ).
Note: By convention, the initial page for an iC Web site is called home.mpf .
REQUIREMENT
Before beginning this procedure, make sure you have opened iC Creator (see page 583 ).