Grass Valley iControl V.6.02 - Manual (Page 536)

Creating iControl Web Sites and Pages
Adding a Component to a Web Page
526
Adding a Component to a Web Page
The following components are only available to maintain compatibility with version 1.7:
• Link to device
• Status inspector
• Link to page
• Crosspoint Selector.
The same functionality is available within the Status Icon component.
Adding a Graphical Element to a Web Page
To add a graphical element to a Web page
1. In iC Creator, on the main window, click on a component icon and then from the Web page,
click on the location for the component.
The new graphical element appears at the specified location.
2. Resize the graphical element with the image handles.
Resizing a Web Page’s Graphical Object
To resize a Web page’s graphical object
1. In iC Creator, click the graphical element.
2. From the Web page, click on the location for the component.
3. Drag and drop the selected component to a specific position on the Web page.
The graphical element for the new component appears at the specified location.
Size Size: Width, Height
Position: X, Y
Initial value content of the zone
Zone name the ID used in the scripts to refer to the zone
REQUIREMENT
Before beginning this procedure, make sure you have opened iC Creator (see page 583 ).
Note: Some of the device's properties will automatically be set when using this
method.
REQUIREMENT
Before beginning this procedure, make sure you have opened iC Creator (see page 583 ).
(Continued)
Zone fields to complete