Grass Valley iControl V.6.02 - Manual (Page 468)

Fingerprint Comparison and Analysis
Configuring a Source as the Reference Source in a Comparison Group
458
To configure a source as the reference source in a comparison group
1. On the Configuration tab, in the Fingerprint comparison setup area, expand the
comparison group folder representing the group whose source you would like to configure
as the reference.
2. Right-click the source you would like to configure as the reference, and then click Set as
reference source.
The desired new reference source’s name becomes italicized and the former reference
source’s name is no longer italicized.
An asterisk (*) appears next to the name of the comparison group indicating pending
changes.
3. Click Apply all to save changes to the comparison group.
The asterisk next to the comparison group name disappears indicating all changes are now
saved and saved to the group.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened Audio Video Fingerprint Analyzer (see page 579 ).
• There are currently no comparisons underway for the comparison group you would like
to edit.
• [RECOMMENDED]: You are performing this procedure as a task within the context of an
approved workflow (see "Sample Workflows" , on page 451).
Note: An italicized source name indicates a source is configured as the reference.